What we check in your cold room
- Thermodynamic system inspection: pressures, temperatures, superheat and subcooling
- Technical cleaning of condensers and evaporators
- Refrigerant charge check and leak detection
- Electrical inspection: retightening, current measurement and contactor condition
- Control calibration, setpoint adjustment and alarm testing
- Technical report per visit: what was measured, what was done and what needs attention
Preventive, corrective and monitoring services
The three services work together: preventive maintenance reduces the chance of failure, corrective service fixes failures once they happen, and monitoring keeps watch over the operation and dispatches the team when deviations occur.
-
Preventive maintenance
Visits scheduled according to the criticality of each system, with inspections, measurements, technical cleaning and a report on every visit.
-
Corrective maintenance
24/7 on-call service, with technical triage at first contact, fault repair and the root cause documented in a report.
-
24-hour monitoring
In-house team working in shifts, with rounds and service dispatch according to the agreed protocol.
Signs your cold room needs maintenance
- Temperature above specification or fluctuating during the day
- Ice building up on the evaporator
- Compressor short cycling, or running nonstop
- Water on the floor or dripping near the evaporator
- A door that does not close properly, or a damaged door gasket
- Unusual noise or vibration
- Temperature alarms going off more and more often
- Energy use rising with no change in the operation
Any of these signs calls for a diagnosis. With perishable product, do not wait for a breakdown.
How it works
-
Contact: you tell us the city and state, the type of cold room and what is happening
-
Assessment of the installed system, any manufacturer
-
Criticality-based maintenance plan, with visits scheduled around operational windows
-
Report and recommendations on every visit, with a documented history of the cold room
Who it is for
- Supermarkets, distribution centers, food industry, meat processing and agribusiness
- Operations with perishable product, where a refrigeration outage means loss
- Multi-brand sites, with cold rooms and equipment of different ages and manufacturers
- Companies that want service terms defined in a contract
FAQ
What does cold room maintenance include?
Preventive maintenance: thermodynamic inspection (pressures, temperatures, superheat and subcooling), technical cleaning of condensers and evaporators, refrigerant charge and leak checks, electrical inspection, control calibration and alarm testing, with a technical report on every visit. Corrective maintenance: on-site diagnosis, fault repair and a documented root cause.
How often should a cold room have preventive maintenance?
Frequency is set in the plan, based on the criticality of each system and the condition of the equipment: systems whose failure would stop your operation get more attention. The plan is reviewed against the report history.
Do you service cold rooms of any brand?
Yes. Frio Ideal is multi-brand and services cold rooms and refrigeration systems from any manufacturer, including sites with equipment of different ages and brands.
My cold room stopped. What should I do?
Call us or message us on WhatsApp: our on-call service is 24/7. Technical triage starts at first contact, with guidance to protect your product while the team is en route. Arrival time depends on location and contract terms.
What is the difference between preventive and corrective cold room maintenance?
Preventive maintenance is scheduled: visits with inspections, measurements and cleaning to reduce the chance of failure. Corrective service responds to a failure that has already happened, with a repair and a documented root cause. Preventive maintenance reduces failures but does not eliminate the need for corrective work; 24-hour monitoring complements both.
How much does cold room maintenance cost?
Each quote is based on an assessment of the installed system and depends on the plan scope, the criticality of the operation and the location. Use the form to send us the type of cold room, the city and the state, and our team will contact you.
Do you serve clients outside São Paulo?
Yes. We are based in Vargem Grande Paulista, Greater São Paulo, and provide nationwide coverage. Arrival time depends on location and contract terms.
Tell us about your cold room
Share the type of cold room, the city and state, and what you need: a preventive plan, a repair or monitoring.
- 24/7 emergency service
- In-house engineering in the field
- Over 15 years in operation
- Smart Cold authorized service provider